Automatically Charges Battery

Provisions for Charging 10 Vehicles
Can Not Over Charge Battery
All Batteries Isolated
Ammeter Indicates Total Charger Output
Digital Voltmeter, A Selector Switch Permits Operator to View Voltage of Each Vehicle

The Auto Charge 10 is designed specifically for those who demand the ultimate in an automatic battery charging system. Built in modular fashion so that it can be configured for applications with as few as 3 vehicles or as many as 10 vehicles, the Auto Charge 10 permits monitoring of the voltage of all the vehicles from one central location. Individual charge indicators on each module indicate the current flowing to each vehicle. Central charging systems often have difficulty with different line lengths between the charger and the vehicle. Thus, the battery in the remote vehicle does not receive sufficient charge. The Auto Charge 10 charges all batteries precisely and equally, regardless of line length. Each module in the charger is an individual charger control dedicated to one vehicle. Each module is connected to the vehicle it charges by 4 wires. Two wires carry the charging current, the other two sense the battery voltage. The control circuit in the charging module adjusts the output voltage to obtain the correct voltage at the battery, thus compensating for line voltage drops.

A digital voltmeter on the master panel permits an operator to monitor the voltage of each vehicle. Most installations of the Auto Charge 10 are made to locate it in a dispatcher's area or some central location to facilitate monitoring of the voltage and charging rate of the vehicles.

Specifications:

Input: 120 volts 50/60Hz, 15 amps
Output: for 12V batteries
Output Current: 0-10 amps per module
Charge Indicator: 0-15 amps meter, 1 per module
Weight: 120 lbs
Warranty: 3 Years

Image may reflecty different model with alternative number of charging stations