Kussmaul Auto Charge 1200
Eject unit
Remote Kit
Kussmaul Auto Charge 1200 Eject unit Remote Kit
Kussmaul

Kussmaul Auto Charge 1200 Remote Kit 12V

$1,117.60
  • 40A, 12V charge rating
  • Automatic operation regulates output to a single 
    battery bank
  • Automatically charges and supports parasitic DC loads: data terminals, radios, hand lights, etc. assuring battery is ready for vehicle start 
  • A patented built-in sense circuit checks battery voltage 120 times per second to compensate for voltage drop in charging wires providing quick re-charge, with no overcharge
  • Designed for rigors of emergency vehicle use; heavy duty aluminum case 
  • 3 year warranty
Input: 120 Vac, 60 Hz., 10 Amps Max
Input Fuse: 15 Amps Fast Acting
Output: 12 Vdc, 40 Amps
Output Fuse (Recommended): 80 Amps (Part Number: 090-0080-0)
Voltage Sense: Remote, Electronic, No Sense Lines Required 
Power Indicator: Indicates Input Power applied
Charge Indicator Options: Remote Bar Graph Display, Deluxe Status Center, or Watertight Status Center
Weight: 26 lbs
Warranty: 3 Years
 
The Auto Charge 1200 REMOTE is a fully automatic battery charger with a very high output for vehicles with a single battery system. Remote voltage sensing is provided to compensate the charger output for the voltage drop in the charging wires. No sense lead wires are required. It is ruggedly constructed for mounting in the vehicle. May be used for positive and negative ground systems. 
This charger has three remote indicator options. Option 1, is the standard, 10 Element, Single Bar Graph Display. This indicator will come with the charger unless otherwise specified. Order 091-187-12-IND for this option. Option 2, is the Auto Charge Deluxe Status Indicator. This indicator has a digital voltage and ampere display, a 5 segment bar graph display to indicate the output current, and 4 LED's to show the condition of the batteries. Order 091-187-12-R-194 for this option. Or Option 3, is the Watertight Auto Charge Deluxe Status Center. This is the same indicator as Option 2, only the indicator is housed in a watertight bezel. The bezel is available in 6 different colors, Red, White, Blue, Yellow, Gray, and Black. Specify color choice when ordering. Order 091-187-12-R-194-WT for this option.
 
The Auto Eject WP is a power input connector designed to be mounted in the side of a vehicle to permit connecting 120 Volt AC shoreline. It comes with a weatherproof cover. The cover is spring loaded to close, preventing water from entering when the shoreline is not connected. A solenoid wired to the vehicle’s starter, is energized when the engine is cranked. This instantaneously drives the plug from the receptacle. This simple, reliable device, eliminates forever the broken cables which result when drivers forget to remove the shoreline before driving away.
 
Auto Eject:
 
Input: 12 Vdc
Output Connector Voltage: 120 Vac
Output Connector Current: 20 Amps                               
Weight: 2 lbs
Warranty: 2 Years
 
 
Full Description
  • 40A, 12V charge rating
  • Automatic operation regulates output to a single 
    battery bank
  • Automatically charges and supports parasitic DC loads: data terminals, radios, hand lights, etc. assuring battery is ready for vehicle start 
  • A patented built-in sense circuit checks battery voltage 120 times per second to compensate for voltage drop in charging wires providing quick re-charge, with no overcharge
  • Designed for rigors of emergency vehicle use; heavy duty aluminum case 
  • 3 year warranty
Input: 120 Vac, 60 Hz., 10 Amps Max
Input Fuse: 15 Amps Fast Acting
Output: 12 Vdc, 40 Amps
Output Fuse (Recommended): 80 Amps (Part Number: 090-0080-0)
Voltage Sense: Remote, Electronic, No Sense Lines Required 
Power Indicator: Indicates Input Power applied
Charge Indicator Options: Remote Bar Graph Display, Deluxe Status Center, or Watertight Status Center
Weight: 26 lbs
Warranty: 3 Years
 
The Auto Charge 1200 REMOTE is a fully automatic battery charger with a very high output for vehicles with a single battery system. Remote voltage sensing is provided to compensate the charger output for the voltage drop in the charging wires. No sense lead wires are required. It is ruggedly constructed for mounting in the vehicle. May be used for positive and negative ground systems. 
This charger has three remote indicator options. Option 1, is the standard, 10 Element, Single Bar Graph Display. This indicator will come with the charger unless otherwise specified. Order 091-187-12-IND for this option. Option 2, is the Auto Charge Deluxe Status Indicator. This indicator has a digital voltage and ampere display, a 5 segment bar graph display to indicate the output current, and 4 LED's to show the condition of the batteries. Order 091-187-12-R-194 for this option. Or Option 3, is the Watertight Auto Charge Deluxe Status Center. This is the same indicator as Option 2, only the indicator is housed in a watertight bezel. The bezel is available in 6 different colors, Red, White, Blue, Yellow, Gray, and Black. Specify color choice when ordering. Order 091-187-12-R-194-WT for this option.
 
The Auto Eject WP is a power input connector designed to be mounted in the side of a vehicle to permit connecting 120 Volt AC shoreline. It comes with a weatherproof cover. The cover is spring loaded to close, preventing water from entering when the shoreline is not connected. A solenoid wired to the vehicle’s starter, is energized when the engine is cranked. This instantaneously drives the plug from the receptacle. This simple, reliable device, eliminates forever the broken cables which result when drivers forget to remove the shoreline before driving away.
 
Auto Eject:
 
Input: 12 Vdc
Output Connector Voltage: 120 Vac
Output Connector Current: 20 Amps                               
Weight: 2 lbs
Warranty: 2 Years
 
 
Current Stock:
Shipping Cost: Calculated at Checkout
MPN: 091-187-12-R-KIT
SKU: 091-187-12-R-KIT