The 570 Prewired Solar Kit Includes three Go Power 190 watt panels and the 30 Amp PWM Bluetooth Lithium Controller
This is the full prewire solar kit that maxes out the Go Power 30 amp PWM charge controller. With a total of three (3) 190 watt solar panels sending power to your house battery bank, you will be able to use many of your loads off-grid while boondocking. In an 8 hour solar day, this system could produce 200 Ah or more of 12-volt charging power.
570 Watt Pre-Wired Kit Includes:
– 3 -190 watt solar panels
– PWM 30 Amp Bluetooth Lithium Compatible Controller
– Mounting Hardware
– Branch Connectors
– Pre-Wire Cables
This 570 Watt – three 190 watt panel kit is designed for travel trailers, fifth wheels, Class C, Class B and motorhomes and coaches that have the prewired solar connectors on the roof of the RV. This can either be a MC4 pigtail on the roof or a prewired system using an MC-4 cable entry plate. Includes: 3-190 Watt Panels Brackets Go Power PWM 30 Bluetooth UL Lithium Compatible Controller Extension cable set
DETAILED INFORMATION OF ITEMS IN 570 WATT PRE-WIRED KIT
190 Watt Go Power Solar Module
This kit uses Go Power 190 watt rigid solar panels for power production. The 190-watt solar panel is roughly 27″ X 60″ and has a 25-year output warranty directly from Go Power, a trusted name in RV solar for decades. The module utilizes MC-4 connectors for easy watertight connections on the roof. It is designed and warrantied for RV use.
Solar Charge Controller
The Go Power PWM 30 Bluetooth Lithium controller can handle solar arrays up to 570 watts. Primarily for RV use, It is designed for flush panel mounting, but there is an optional knockout box available for surface mounting. To protect and properly charger your house battery bank, the controller has several different battery charging profiles including Sealed, AGM, Flooded, and Lithium. It can charge two battery banks and is our most common RV charge controller. It is UL listed and now has Bluetooth connectivity. There is also a USB port on the front of the charge controller.
Each panel in the kit will come with a set of mounting brackets and hardware from Go Power. These brackets are designed to connect the panel to the RV roof. There are 4 brackets per panel that connect to the aluminium frame of the rigid frame.
Solar wires and branch connectors
Each prewired panel kit will include the needed solar extension cable pairs and the multi-panel kits will also include the branch connector pairs for the 2nd and 3rd panels. MC-4 solar connectors are used for all roof connectors to make them watertight and quick connect.
Have a question about RV solar power, reach out and we will try to help.
Struggling with what to buy? Need more information or have questions about solar power or inverter systems for your RV, reach out on the form below or call us at 1-866-574-4983.
More Information on Panels from our RV solar guide
A selection of articles that may be helpful when building and installing a solar system in your solar ready RV.