ETC 1224 B EURO TRAILER CONVERTER is a direct electrical interface between 12 Volt American highway transport tractors and 24 Volt European trailers. Its enclosure houses 6 individual circuits capable of supplying a total power of 800 Watts at 24 Volts to power both the ABS system and various lighting circuits of a trailer. IT IS DESIGNED TO INTERFACE BETWEEN STANDARD TRACTOR AND TRAILER CONNECTORS AND DOES NOT REQUIRE HARD WIRING.
ETC 1224 B EURO TRAILER CONVERTER is compact and light, weighing only 15 pounds. It is flat and can be easily mounted to either the tractor chassis or the front face of the trailer.
ETC 1224 B EURO TRAILER CONVERTER is easy to connect. It has two standard 7 pin receptacles - 1 each for input and output. ETC 1224 B internally distributes power replicating the electrical commands of the tractor - making the tractor appear as a 24 volt vehicle to the trailer.
ETC 1224 B EURO TRAILER CONVERTER is a most efficient converter. This efficiency guarantees cool operation, high reliability and long life expectancy for the converter.
ETC 1224 B EURO TRAILER CONVERTER is designed to operate over an extremely wide temperature range and under the most rigorous vibration and shock conditions. Its ruggedness is further enhanced by weatherproofing, and electronic protection against abnormal hookups, and output overloads.
ETC 1224 B EURO TRAILER CONVERTER is designed for use on vehicles with negatively grounded systems only.
- Input Voltage: 11-15 VDC (normal) and will withstand up to 30 VDC (abnormal)
- Input Current: 72 Amps. Max Total
- No. of Input Circuits: 6
- Output Voltage: 25 ± 0.5 VDC
- Black: 4
- Brown: 7.5
- Red: 4
- Yellow: 4
- Green: 4
- Blue: 4
- Output Regulation: 0.2 Volts over entire load and input voltage range
- Output Ripple: 100 mV RMS max. @ -40C (worst case) 50 mV RMS @ OC
- Overload Protection: Via tractor fuse
- Temperature Range: -40C to +60C
- Efficiency: 90%
- nput Connection: Via 7 pin socket
- Output Connection: Via 7 pin plug (at the end of 12 ft. or 3.6 m of coiled cable)
- Weight: 15 lbs. approx.
- Construction: Aluminum Housing with Steel End Caps
- Mounting: 6 position base mounting flange with clearance for 1/4 in. bolts